|
||||||
|
These are our major facilities and equipments which allow us to fulfill customers' high requirements for material supply, rolling, annealing processing, etc.
Cold Rolling Machine
Cold Rolling, which has more advantages comparing with Hot Rolling, can greatly luster steel plates and make exactly their thickness and toughness in accordance with customers' specification.
Processable Sheet Metal spec:
Thickness 2.0-20.0mm
Size W 500mm L4,000 (Max)
Size and Number of Facilities:
16-inch Rolling Machine 2sets
16-inch Automatic Rolling Machine 1set
12-inch Rolling Machine 2sets
Leveler
Leveler improves Sheet Metal's warpage resulting from rolling or cutting and makes it reasonably flat.
Processable Sheet Metal spec and Number of Facilities :
Thickness 16mm (Max), Width 560mm(Max) 2sets
Thickness 6mm (Max), Width 560mm(Max) 1set
Annealing Furnace
We adopt Bright Annealing with Non-Oxidizing Atmosphere Heating Furnace which causes neither decarburization nor scales, and finishes up steel plates having soft and beautiful surface.
Size and Number of Facilities:
W650 L2,400 H600 5sets
W650 L3,800 H750 2sets
Pickling Machine
Our Pickling Machines can pickle thin or thick steel plates (thickness from 2mm to 20mm), especially steel plate over 9mm which other major steelmakers often will not treat is in our line.
Size of Facility:
W1,100 H1,000 L4,000 (containing 4 layers)
Shirring
Our Shirring Machines can cut Sheet Metals in the exactly same size as customers' requests, especially it is one of our strong points to have a capacity to treat long (4m)or thick (18mm) Sheet Metal.
Processable Sheet Metal spec and Number of Facilities :
Thickness 4-14mm , Width 4,000mm 1set
Thickness 4-18mm , Width 2,400mm 1set
Thickness 2-10mm , Width 2,400mm 1set
Thickness 1.2-16mm , Width 2,100mm 1set
Thickness 1.2-4.5mm , Width 1,900mm 1set