NKC | Product List | Temma Sheet Metal Division | Stock Products(Gauge Steel and SS Cold Rolled Steel)

HOME > Product List > Temma Sheet Metal Division > Stock Products(Gauge Steel and SS Cold Rolled Steel)

Following Sheet Metals are available to deliver as quickly as customers' request due to their proper stocks.

Applications
Side Panels of machine tools, Metal Mold Platform, Countersunk Springs, Washers , Mold for Punching Printed Board, Platform Balances and others
Names
SK5(JIS) , TK5(equivalent to SKS95)
Components

Steel Type	C	Si	Mn	P	S	Cu	Ni	Cr	V
SK5	0.8∼0.9	0.35	0.5	0.03	0.03	0.25	0.25	0.30	-
TK5	0.8∼0.9	0.5	0.8∼1.1	0.03	0.25	0.25	0.25	0.2∼0.6	-

Steel Type	Sheet Thickness and tolerance	Width		Length
SK5	2.0±0.08 2.3±0.08 2.5±0.08 3.0±0.08 3.2±0.08 3.5±0.08 4.0±0.10 4.5±0.10 5.0±0.10 5.5±0.10 6.0±0.10 6.5±0.10	205 ±3 -0	305 ±3 -0	2000 ±15 -0
TK5 (SKS95 equivalent)	7.0±0.15 8.0±0.15 9.0±0.15 10.0±0.2 11.0±0.2 12.0±0.2 13.0±0.25 15.0±0.25	205 ±3 -0	305 ±3 -0

Applications

Plate Base Molds, Die-Set Spacer, Machine Structure, Punch Dies for Plating. Adopting this Sheet Metal substitute for the traditional means needed to grind and polish hot-rolled steel plates, you can surely cut man-hour and shop costs for the process.
Features
This is an Extremely-Thick Cold-Rolled Sheet having a tensile strength of 50kg, high plane accuracy and excelling in free-machining. Therefore, it is the most suitable for processing machine parts required high accuracy. In addition, its weldability makes it possible to design machine beds and side planks on the basis of welding construction.
Plane Accuracy
Roll Surface Finish�� Having about 2 MIC of luster and good for Plating
Flatness��Only 0.5mm per 1m of warpage helps to cut extra processing works.
Name
TC10M (Cold-Rolled),TC10A(Annealed)
Size

Sheet Thickness and tolerance	Width		Length
4.0±0.1 4.5±0.1 5.0±0.1 6.0±0.1 7.0±0.1 8.0±0.1 9.0±0.1 10.0±0.15 12.0±0.15 15.0±0.15 16.0±0.15	410	490	approx. 2000 ″ ″ ″ ″ ″ ″ ″ ″ approx. 1800 approx. 1700